Idiomas disponibles
Idiomas disponibles
Installation Instructions
REVERSING THE DOOR SWING
IMPORTANT
NOTES
When reversing the door swing:
• Read the instructions
all the way through before
starting.
• Handle parts carefldly to avoid scratching paint.
• Set screws down by their related parts to avoid using
them in the wrong places.
• Provide a non-scratching
work surface for
the doors.
IMPORTANT:
Once you begin, do not move the
cabinet until door-swing reversal is completed.
These insu_ucfions are for changing
the hinges flom
the right side to the left side--if you ever want to change
the hinges back to the right side, follow these same
insu-ucfions and reverse all references
to left and right.
TOOLS REQUIRED
Phillipsscrewdriver
Maskingtape
5/16" hex-head
socket driver
T20or T25Torxdriver
(needed for somemodels)
Puttyknife or thin-blade
screwdriver
5/16" open-end
wrench
[] REMOVE THE FREEZER DOOR
2.1 Tape
the door shut with masking
tape.
2.2 With a 5/16"
hex-head
socket
drivm,
remove
the
screws that
hold
the top hinge
to the cabinet.
2.3 Lift the hinge
straight
tap to flee the hinge
pin
flom
the socket
in the top of the (loot and
set it
aside,
along with
its screws.
T°pHinge_
I
2.4 Remove the rope and tilt the (loot away flom the
cabinet. Lift it off the center hinge pin.
2.5 Set the (loot on a non-scratching
surface with
the outside up.
Ill BEFORE YOU START
1.1 Unplug
the refrigerator
from
its electrical
outlet.
1.2 Empty
all door shelves,
including
the dairy
compartment.
CAUTION: Do not let either (loot drop to the
floor. To do so could damage the (loot stop.
2.6 Transfer
tim 2 screws
flom
tim opposite
side of
the cabinet
to the screw holes vacated
by the
top hinge
removal.
11
