Idiomas disponibles
Idiomas disponibles
Unit Overview and Operations
Before using the device, please check the machine's technical data. The right
voltage is 220-240V/50Hz (See the section "Technical characteristics of the
product").
Do not set the chosen temperature above 235°C. The operating temperature
is between 0°C and 235°C.
Insert the power plug into the unit. Insert such plug into the power outlet.
Turn on the power supply connection cable of the press by using the On/Off
switch. The control panel will light up after this process.
P1 = temperature (set the desired temperature with the +/- key)
P2 = timer/time ( set the desired time with the +/- buton )
P3 = Celsius or Fahrenheit ( select C for Celsius )
P4 = Setting of the automatic press shutdown function in minutes
P5 =Automatic shutdown function. Switching off the heating function of the
two heating plates after the set time (Note: The machine is still connected
and warms up again after pressing any of the butons)
1. Press the SET buton to access the temperature
setting of the two heating plates.
P1 is displayed on the control panel.
2. Now press the "up" or "down" buton to reach
the desired temperature. P1 is displayed on the
control panel.
3. Press the SET buton again to enter the time
setting mode.
P2 is displayed on the control panel.
Page 26
