Idiomas disponibles
Idiomas disponibles
Setting the Operating Function
The instrument has 3 operating functions:
Cross-line (horizontal and vertical laser lines)
ƒ
Horizontal line only
ƒ
Vertical line only
ƒ
1.
To activate the Cross-Line Function, Power ON the instrument. This is a default function,
and it is automatically activated when the instrument is Powered ON.
To activate the Horizontal Line Function, press the H/V Laser Beam Selector Button
2.
one time.
3.
To activate the Vertical Line Function, press the H/V Laser Beam Selector Button
second time.
To return to the Cross-Line Function, press the H/V Laser Beam Selector Button
4.
once again.
All functions can be selected both in the Self-Levelling Mode and in the Pendulum-
Locked Mode.
QuickSet
Rotating Mount and Ceiling Bracket
®
The QuickSet
Rotating Mount and Ceiling Bracket allow mounting the laser instrument to
®
project the laser beam lines in the desired positions.
They can be attached to various upright surfaces such as steel and wood framing studs,
steel door frames, I-beams, angle iron or acoustical ceiling grid.
Only use ToughBuilt
accessories that are designed for this product.
®
14
Using QuickSet Rotating Mount
®
To attach the laser instrument to the QuickSet
1.
of the laser instrument into the QuickSet
6
6
6
Place the QuickSet
2.
To adjust the position of the projected vertical laser line, rotate the instrument
3.
to the left or to the right.
Rotating Mount, slide the rear side
®
Rails
.
®
12
Rotating Mount with an instrument on a flat surface.
®
15
