Idiomas disponibles
Idiomas disponibles
Description
The PC Series Paddock Cleaner is designed to pick up horse dung and other debris with ease to make paddock maintenance quick and easy. The
PC series are installed with a unique electric tipping mechanism that allows for easy emptying of the hopper by a simple controller.
The PC Series Paddock Cleaner is a trailed attachment that comes in two sizes, 1.2m (PC120) & 1.5m (PC150). 8 Polyethylene brushes in 4 rows
powered by a Honda GX200 6.5hp Engine collect the dung into a large hopper. The engine comes with easy electric start and optional remote
throttle cable, allowing the installation of the throttle on the back of a ATV should it be required.
These machines should however only be used to perform tasks for which they were designed - use of the machine for any other function may be
both dangerous to persons, and potentially damaging to components. Use of the machine beyond the stated usage may invalidate any applicable
warranty, as well as being potential in breach of applicable safety regulations.
Identification
Each machine is fitted with a serial plate (shown below) which details the
following:
1.
Model
2.
Date of Manufacture (DOM)
3.
Serial Number
4.
Mass
When enquiring regarding spares or additional equipment, ensure you have
this information to hand.
Noise Levels
The sound of this machine, as measured at the typical operator location under normal operating conditions, is 91db. If being towed by an open-
cab vehicle, it is essential that ear defenders or a suitable helmet is worn at all times. If being towed behind a closed-cab UTV, 4x4 or similar, then
the cab should remain closed to reduce noise. It is the operators responsibility to ensure that noise levels experienced by the operator are within
legal limits.
EAR DEFENDERS OR EQUIVALENT HEARING PROTECTION DEVICES SHOULD BE WORN
Implement Decals
If your implement does not contain all of the decals shown below, please contact
your equipment supplier for replacement decals before use.
Note: All decals must be present and visible. It is imperative that these are replaced
if damaged to prevent potential harm to users.
WARNING - Read operators
manual before handling this
machine. Observe in
structions and safety rules
when operating
CAUTION - Rotating blades.
Maintain sensible working
distance from machine and
keep hands and feet clear of
blades
AT ALL TIMES WHEN OPERATING THIS EQUIPMENT!
machine when in operation
CAUTION - Entanglement
Hazard. Keep hands away
from rotating components
CAUTION - risk of trapping.
Keep hands away from
3
English
