Injecta HYDRA PR Manual De Instalación página 9

Idiomas disponibles
  • ES

Idiomas disponibles

Paragraph 7 – Flow Rate Calibration
Programming
Paragraph 8 – Statistics
Programming
Paragraph 9 – Password
Programming
EM00136304
On the main menu appears the memorized cc/stroke value.
You can perform the calibration in two modes:
MANUAL – insert manually the cc/stroke value using the
AUTOMATIC – the pump runs 100 strokes, which are
started by pressing the
strokes insert the amount aspirated by the pump using the
The data entered will be used for the calculation of the flow
rates.
On the main menu is displayed, in hours, the operating time
of the pump; press
- Strokes = the number of strokes performed by the pump
- Q.ta (L) = the quantity dosed from the pump expressed in
liters; this information is calculated based on the memorized
cc/stroke value
- Power = the number of pump activations
- Reset = press
(NO), then press
Press
By setting the password, the programming section can be
accessed to view all the setup parameters, but every time
you try to change the settings you will be prompted for the
password.
The flashing line indicates the editable number; press
to select the number (from 1 to 9), then press
the number to modify, and then press
DosingPump.ir
By setting "0000" (default), the password will be eliminated.
rev. 1.0 EN
Operation
key and then confirm with the
key and confirm with the
Operation
to access other statistics:
to reset the counters, select (YES) or
to confirm.
to return to the main menu.
Operation
key.
key, and at the end of the
key.
to select
to confirm.
7
loading