Idiomas disponibles
Idiomas disponibles
NEW CONSTRUCTION INSTALLATION INSTRUCTIONS (Continued)
3. If this fan is not replacing an old fan, be sure to cut a
7-3/4 in. x 7-1/2 in. opening for the fan housing.
4. Attach the duct connector (C) to the fan housing (A).
5. Remove the two screws on the side of the fan housing (A) that
hold the fan motor in place. With the screws removed, unplug
the fan motor and pull the fan motor out of the fan housing (A).
6. Remove the wiring box cover from the fan housing (A).
3
4
A
5
6
Wiring box
cover
8
C
A
Fan motor
plug
Fan motor
A
