Idiomas disponibles
Idiomas disponibles
OWNER'S MANUAL | ASSEMBLY GUIDE
ASSeMBlY INSTRUCTIoNS
Find a large, clean area to assemble your appliance�
Remove all packing material before assembling�
Sharp edges. Wear gloves while assembling.
Heavy pieces. Two people should assemble this appliance.
Use four (4) M6 shoulder bolts
STEP 01
NOTICE
and hood handle standoff and two (2) mica washers to the front of
the hood�
• DO NOT mix old and new batteries.
• DO NOT mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries.
[a.]
× 4
Install the four (4) control knobs by pushing them into place
STEP 03
in the oFF position�
06
CAUTIoN
CAUTIoN
[a.]
to attach the handle
Adjustable wrench
NOTICE
Place appliance on a heat-resistant and flame-resistant
NOT INCLUDED:
TOOLS NEEDED:
lPG cylinder
Phillips head screwdriver &
surface while in use.
Adjustable wrench
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
lPG cylinder must include collar to
lPG cylinder must include collar to
protect lPG cylinder valve.
protect lPG cylinder valve.
Slide the grease cup into the holder on the back of the
STEP 02
NOTICE
griddle body�
DO NOT leave the hood closed for more than 10 minutes while
cooking.
NOT INCLUDED:
NOT INCLUDED:
17" griddle base
lPG cylinder
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
NOTICE
lPG cylinder must include collar to
lPG cylinder must include collar to
protect lPG cylinder valve.
protect lPG cylinder valve.
DO NOT place items on stabilizing shelf during use.
NOT INCLUDED:
17" griddle base
Model: 6038
NOT INCLUDED:
TOOL NEEDED:
Phillips head screwdriver
lPG cylinder
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
ELECTRIC REQUIREMENTS:
120V 60Hz
NOT INCLUDED:
NOT INCLUDED:
22" griddle base
lPG cylinder
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
NOT INCLUDED (OPTIONAL):
Two (2) d batteries
NOT INCLUDED:
22" griddle base
BLACKSTONEPRODUCTS.COM/SUPPORT
TOOL N
NOT IN
Adjust
AA bat
NOT IN
AA bat
