3- Advanced Kit (Orp) - filtreau BSONE-EVO-10 Manual De Usuario

5- Place the suction filter (4) inside the ACID drum.
6- Connect one end of the suction tube (3) to the PH control inlet (12).
7- Place the pipe nibble (9) inside the flange (10).
8- Place the injector (8) inside the pipe nipple (9).
9- Connect the other end of the injection tube (3) to the injector (8).
10- Place the probe holder (6) inside the flange (7).
11- Place the PH probe (5) inside the probe holder (6).
12- Place the PH probe (5) connector in the BNC connector (13) of the
equipment.
3.2.3- ADVANCED kit (ORP) (OPTIONAL in BSONE-EVO series
equipment)
The equipment continuously measures the bactericide level of water through
this probe, by means of an "ORP" probe. Simply adjust the required level and
the equipment automatically maintains the level of disinfection by adjusting the
production of chlorine to the real needs of the swimming pool.
The screen shows the "Redox" level (bactericide capacity) present in the
swimming pool.
The ORP (Oxidation Reduction Potential) is the electrical voltage that indicates
the oxidation capacity or reduction of a solution. In swimming pools, the
oxidation capacity is directly related to the bactericide power of the water,
which is directly related to the concentration of free chlorine in the pool.
This probe enables you to adjust the equipment in AUTOMATIC operating
mode.
Manual BSONE-EVO v.2
3.2.3.1- Parts
1-REDOX Probe
2-Probe-Holder
3-Flange
4-Reference liquid 465mV.
59 / 95