Idiomas disponibles
Idiomas disponibles
STEP 3:
PREPARE THE VENTING BLOWER
ROOF VENTED
INSTALLATION:
1.
2.
3.
4.
5.
6.
Remove
two blower
unit mounting
screws
and one
blower
plate screw.
Remove
the blower
plate from
cabinet.
See Figure
18.
Carefully
lift the blower
unit out of the microwave
oven.
Rotate
blower
unit 90 ° so the exhaust
ports face the
top of the cabinet.
See Figure
19.
Place
blower
unit back into microwave
oven.
Use side cutters
or tin snips to cut and remove
knockouts
"A" from blower
plate.
Discard
knockouts.
Be careful
not to distort
the plate. See Figure
20.
Reattach
blower
plate to microwave
oven.
Attach with
the one blower
unit mounting
screw
and then the one
blower
plate
mounting
screw.
See Figure
21.
NOTE:
When
using Roof venting,you
need one
blower
unit mounting
screw.See
Figure
21.
_
lower plate
mounting
screw
blower plate
blower unit
mounting screw
Figure 18
blower
unit
Figure 19
Knockouts "A"
blower plate
Figure 20
blower unit
blower plate
mounting
screw
blower unit
mounting screw
Figure 21
12
