Grinding Tips For Best Results - Ambiano HY-1407 Manual Del Usuario

• The amount of coffee beans required is about the same as the specified quantity of medium
ground coffee tablespoons. For example: to make 2 tablespoons of ground coffee, you will need 2
tablespoons of beans.
• Grinding may be stopped by:
o The user - you may press the Power button at any time to stop the grinding operation.
o An out of position ground coffee container.
Note: If the grinding container part is not correctly in place, the safety switches in the unit will not
allow the grinder to work. All parts must be securely in place to safely use the burr mill.

Grinding tips for best results

You may customize the above bean quantity recommendations for your needs, but always bear in
mind the following:
• A coarser setting is required to brew coffee manually, in a percolator, using a French Press or for
Cold Brew coffee preparation.
• Using finer grounds than required for an automatic drip coffee maker might cause the coffee to
taste stronger than desired. If this happens, use less coffee grounds or change the grind setting to
medium or try a different setting to obtain your desired result.
• Using coarser grounds than required for an automatic drip coffee maker might cause the coffee
may taste weaker than desired. If this happens, use more coffee grounds to obtain your desired
result. For a regular or stronger cup of coffee, it is recommended to use a medium to fine grind
setting.
• Use a finer setting to brew espresso or cappuccino.
• This appliance is for coffee beans only.
• The ground coffee chamber and its lid must always be in place when using this appliance.
• Do not use the finest setting when grinding coffee for an automatic drip coffeemaker. The finer
grounds may cause the coffee basket to overflow.
• To avoid overheating the motor, do not grind more than 2 full whole bean hoppers or 2 full 12-cup
cycles without taking a break. Allow the motor to cool to room temperature at least 2 minutes
between cycles.
• If the grinder stops working after running consecutive cycles, unplug the grinder from the wall
outlet. Allow the unit to cool for at least an hour. Then plug grinder back in and use as needed.
• Flavored coffee beans may gum up the burrs and leave an oily residue when stored in the hopper
for extended periods of time.
• It is recommended to clean the unit after every third use for best performance.
• After using, open the grinder to the coarsest setting and run empty to clear the grinding path.
Note: To keep your coffee beans as fresh as possible, do NOT store in the bean hopper for extended
periods of time.
Use
7