Idiomas disponibles
Idiomas disponibles
12
16. DECLARATION OF ELECTROMAGNETIC COMPATIBILITY
The LIFTING ARMCHAIR is designed for use in the electromagnetic conditions specified in the following
tables. The user of the LIFTING ARMCHAIR must ensure that it is used in the conditions specified.
Table 1
THE LIFTING ARMCHAIR IS INTENDED TO FUNCTION IN THE FOLLOWING ELECTROMAGNETIC
CONDITIONS. THE CLIENT OR USER MUST ENSURE THAT IT IS USED IN THESE CONDITIONS.
EMISSION TESTS
RF EMISSIONS
CISPR 11
RF EMISSIONS CISPR 11
HARMONIC EMISSIONS
EN 61000-3-2
VOLTAGE FLUTTER/
FLICKER EN 61000-3-3
Table 2
THE LIFTING ARMCHAIR IS INTENDED TO FUNCTION IN THE FOLLOWING ELECTROMAGNETIC
CONDITIONS. THE CLIENT OR USER MUST ENSURE THAT IT IS USED IN THESE CONDITIONS.
IMMUNITY TESTS
ELECTROSTATIC
DISCHARGE (ESD)
EN 61000-4-2
FAST TRANSIENTS
AND BURSTS
EN61000-4-4
IMPULSE VOLTAGES
EN 61000-4-5
VOLTAGE DROP OUTS,
BRIEF INTERRUPTIONS
AND VARIATIONS
OF VOLTAGE ON THE
POWER SUPPLY LINES.
EN 61000-4-11
CONDUCTED RF
EMISSIONS EN55011
MANUFACTURER'S GUIDE AND DECLARATION
COMPLIANCE
THE LIFTING ARMCHAIR USES RF ENERGY ONLY FOR INTERNAL
GROUP 1
ITS RF EMISSIONS ARE THEREFORE VERY LOW AND IN ALL LIKELIHOOD
DO NOT INTERFERE WITH NEARBY ELECTRONIC EQUIPMENT.
CLASS B
THE LIFTING ARMCHAIR IS INTENDED TO BE USED IN
COMPLIANCE
ALL BUILDINGS, INCLUDING THE HOME AND BUILDINGS
CONNECTED DIRECTLY TO THE LOW VOLTAGE MAINS
ELECTRICITY NETWORK FOR RESIDENTIAL APPLICATIONS.
COMPLIANCE
MANUFACTURER'S GUIDE AND DECLARATION
TEST LEVEL IEC 60601
± 4 KV IN CONTACT
± 8 KV AIR
1KV – 5KHZ INDIVIDUAL
COUPLING, 2000V - 5KHZ
PARALLEL COUPLING
2KV PARALLEL
COUPLING;
1KV INDIVIDUAL
COUPLING
0V/2000MS;
0V/500MS; 0V/50MS;
0V/20MS; 0V/500MS;
0.75V/2000MS;
0.75V/500MS; 0V/50MS;
0.15 ÷ 0.5 MHZ
79 DBµV
0.5 ÷ 30 MHZ
73 DBµV
ELECTROMAGNETIC ENVIRONMENT – GUIDE
FUNCTIONING AND FOR CHARGING THE BATTERY .
COMPLIANCE LEVEL
± 4 KV IN CONTACT
± 8 KV AIR
1KV – 5KHZ INDIVIDUAL
COUPLING, 2000V
- 5KHZ PARALLEL
COUPLING
2KV PARALLEL
COUPLING;
1KV INDIVIDUAL
COUPLING
0V/2000MS;
0V/500MS; 0V/50MS;
0V/20MS; 0V/500MS;
0.75V/2000MS;
0.75V/500MS; 0V/50MS;
0.15 ÷ 0.5 MHZ
79 DBµV
0.5 ÷ 30 MHZ
73 DBµV
ELECTROMAGNETIC
ENVIRONMENT – GUIDE
INFORMATION FOR USE OF
THE DEVICE. THE FLOOR
MUST BE WOOD, CONCRETE
OR CERAMIC. IF THE
FLOOR IS COVERED WITH
A SYNTHETIC MATERIAL,
THE RELATIVE HUMIDITY
MUST BE AT LEAST 30%.
THE QUALITY OF THE
MAINS VOLTAGE MUST
BE THAT OF A TYPICAL
BUSINESS ENVIRONMENT
OR HOSPITAL WHEN
CHARGING THE BATTERY
THE QUALITY OF THE
MAINS VOLTAGE MUST
BE THAT OF A TYPICAL
BUSINESS ENVIRONMENT
OR HOSPITAL WHEN
CHARGING THE BATTERY
THE QUALITY OF THE
MAINS VOLTAGE MUST
BE THAT OF A TYPICAL
BUSINESS ENVIRONMENT
OR HOSPITAL WHEN
CHARGING THE BATTERY.
THE QUALITY OF THE
MAINS VOLTAGE MUST
BE THAT OF A TYPICAL
BUSINESS ENVIRONMENT
OR HOSPITAL WHEN
CHARGING THE BATTERY.
