Velleman KNS130 Manual Del Usuario página 31

LED will light up. When there is nothing covering the light sensor, the multi-color LED will light up and
the blue LED will extinguish again. This can be used as a light intensity indicator.
12.50 Darkness activated spinning LED light
Wiring Sequence
3-18, 4-23-12, 26-17-1-13, 24-2, 22-27, 11-14-25
12
100k Ω
11
27
25
26
14
13
Complete all wiring connections as indicated in the sequence. Switch on the main switch. Cover the light
sensor, and the spinning LED will be on. Uncover the light sensor, and then the spinning LED will turn off.
12.51 Light control spinning LED light
Wiring Sequence
3-18, 4-23-14, 26-17-1-11, 24-2, 22-27 12-13-25
14
13
27
25
26
12
100k Ω
11
Complete all wiring connections as indicated in the sequence. Switch on the main switch, and then the
spinning LED will be on. When the light sensor is covered, the spinning LED will be off. Light is the switch
of the spinning LED in this circuit.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights
reserved. No part of this manual may be copied, reproduced, translated or reduced to
V. 01 – 01/02/2024
23
22
24
2
1
23
22
24
2
1
KNS130
4
3
18
17
4
3
18
17
31 ©Velleman nv