Idiomas disponibles
Idiomas disponibles
Automatic cleaning
Upon power on, the machine plans its cleaning route in a zigzag way and finishes cleaning the whole room in an
orderly and efficent manner. Once cleaning ends, the machine will automatically return to the dock for charging
(cleaning mode by default).
Spot cleaning
Use the
button on the controller so that the machine will take itself as a center to sweep a round zone with the
diameter of 1.2 m. Upon cleaning, the robot will automatically return to the starting point and stop work.(The direction
key on the smart APP can also be used to manually control the machine to the cleaning position.)
UK: [email protected] / US&CA: [email protected]
EN
If you have any questions please email to
18
Cleaned
To be cleaned
DND mode
No voice prompt in DND mode. Use the smart APP to enable or disable the DND mode.
Scheduled cleaning
Use the smart APP to set the time for cleaning. The robot will start cleaning automatically at the scheduled time. Upon
cleaning, it will return to the dock for charging (7x24h scheduling supported).
Spot cleaning
Use the
button on the controller so that the machine will take itself as a center to sweep a round zone with the
diameter of 1.2 m. Upon cleaning, the robot will automatically return to the starting point and stop work.(The direction
key on the smart APP can also be used to manually control the machine to the cleaning position.)
UK: [email protected] / US&CA: [email protected]
If you have any questions please email to
19
EN
