Idiomas disponibles
Idiomas disponibles
>- CONTROL PANEL
You can easily operate this air conditioner
by pressing
relevant
button on the control panel as well as the remote control,
ON/OFF
BUTTON
The air conditioner will be started when it is energized or will
be stopped when it is in operation,
if you press this button.
When the air conditioner is heating, allow 3 minutes after you
press this button.
Mode button
Each time
Mode button is pressed,
the operation
mode is changed
in sequence:
5K_ 6K.
8K cooling only:
COOLING
FAN ONLY
ENERGY
SAVING
COOLING
Control Panel
Mode:
Cooling (with fan speed Lo, Med. High): Compressor
cyctes to maintain
Temperature Set Point, Fan remains
on at selected
speed during compressor
OFF cycle.
Cooling (Auto Fan Speed): Compressor
Cycles to maintain
Temperature
Set Point. Fan speed is controlled
from room
temperature.
Fan remains on during compressor
OFF cycle.
Fan Only: Circulates
and riflers room air at selected speed.
Energy Saving (with fan speed Lo. Med. High)=
Fan cycles ON and OFF with compressor
over a wider
range of temperatures,
Energy Saving (with Auto Fan Speed): Fan cycles ON and
OFF with compressor
at a wider range of temperatures.
Fan
speed dur¿ng ON cycle is dependent
on room temperature.
NOTE= After setting
the mode.
allow three (3} minutes
before
switching
to another
mode.
In the FAN ONLY Mode.
Room
Temperature
display
range is from 0°C (32°}=) to 38_C (99°FL
Room Temperature
below
32°E the Temperature
display
L0.
Room Temperature
above 99°F, the Temperature
display
H1.
Fan Speed
Sutton:
Used to select
fan speed
in sequence
auto. low. medium,
and high.
High
Highest fan speed for maximum
cooling
Medium
Normal fan speed for average cooling
Low
Lowest and quietest
s_eed, greater dehumidification
Indication
symbols of LED on control panel :
Auto fan speed
_
C0oltng
88-
,J_ Lowfan spee_
,,_ Fan only
u,_
Medium fan speed
_
Energy-saving Display set ternp
Display set trainer
_" High fan speed
Q Timer
Above LED _ights on when
the relevant
mode
is in use.
Auto
Works ie Cooling and Energy-Saving
mode to vary fan speed based on room temperature.
Timer
Button:
Used to set or cancel
timer
operation.
When the unit is in operation,
you can set OFF TIMER. When the unit is OFF, you can set ON TIMER. T_mer setting
range
is 0 to 24 hours.
if the OFF TIMER is set. the time LED displays
the remaining
time to turn off the unit for only 12 seconds, then LED
shifts to display set temperature,
ff you press TIMER button
within the 12 seconds,
OFF TIMER will be cancelled,
if the ON TIMER is set. the timer LED displays
the remaining
time to turn on the unit. If you want to cancel ON TIMER.
press TIMER button.
A V
Button:
Used to set room temperature
in COOLING
mode or used to set time in TIMER mode.
NOTE: Temperature
setting
range is from 19_C (66_F) to 31 °C (88°F).
