Idiomas disponibles
Idiomas disponibles
5) The controller will send and receive Note On Off data via the Flash buttons.
NOTE NUMBER
Decimal
Hex
22-69
(16H-45H)
22-117
(16H-45H)
118
(76H)
119
(77H)
120
(78H)
121
(79H)
122
(7AH)
123
(7BH)
124
(7CH)
125
(7DH)
125
(7EH)
6.- BRIEF OF MAIN FUNCTIONS
1 Reverse the direction of the scene
1) Reverse the direction of all the scenes. Press the ALL REV Button, all the scenes should change their directions
2) Reverse the chasing direction of all the programs with speed control: Press the Chase Rev Button
3) Reverse the chasing direction of all the programs with standard beat: Press the Beat Rev Button
4) Reverse chasing direction of any program: Press and hold down the Rec. One Button, then press down the
Flash Button corresponding to your desired program and release together
2 Fade time
1) The amount of time that it will take for the dimmer to go from zero output to maximum output, and vice
verse
2) Fade time is adjusted through the Fade Time Slider, which varies from instant to 10 minutes
3 Tap Sync Button
1) The Tap Sync button is used to set and synchronize the chase rate (the rate at which all scenes will sequence)
by tapping the button several times. The chase rate will synchronize to the time of the last two taps. The LED
above the Step Button will flash at the new chase rate. The chase rate may be set anytime whether or not a
program is running
2) Tap Sync will override any previous setting of the speed slider control until the slider is moved again
3) Use of Tap Sync in setting a standard beat is the same with speed control slider
4 Master Slider
Master Slider control provides proportion level control over all channels and scenes with the exception of the
Flash Buttons. For example: Whenever the Master slider control is at minimum all stage outputs will be at zero
except for any resulting from a Flash Button or FULL ON Button
If the Master is at 50%, all outputs will be at only 50% of the setting of current channel or scenes except for any
resulting from a Flash Button or FULL ON Button
If the Master is at full all outputs will follow the unit setting
Master A always controls outputs of channels. Master B controls program or a scene except in Double Press
Mode
VELOCITY
Program master
Channel light
User Manual | TR-DMX48-2 by Triton Blue | For Professinal use only, not for residential use
FUNCTION
Turn on or off program 1-48
Activate Channel 1-48
FULL-ON
DARK
HOLD
Turn on or off AUDIO
CHASES
SCENES
D. (doble) Modo PRESET
S. (simple) Modo PRESET
Paso
BLACK-OUT
23.
