Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

User's manual
Customer Service
US: 1-800-645-2986
Models
292660
292661
292662
Models
292663
292845
292846
Manual del usuario
Servicio de atención al Cliente
US: 1-800-645-2986
Industrial Portable AC
GENERAL SAFETY INFORMATION
PLEASE SAVE THESE INSTRUCTIONS
Please read this manual carefully for instructions on correct installation and
usage. Please read all safeguards.
• Transport and store unit in upright position only. Leave in upright position
• Place A/C on even, level surface at all times.
• Ensure unit is connected to a grounded power supply of the correct
• Unit will cool when room temperature is between 18°C (64°F) ~ 45°C
• DO NOT use A/C for functions other than those described in this manual.
• DO NOT tilt unit.
• DO NOT cover or obstruct inlet and outlet grilles.
• DO NOT expose to rain, water, wet environments, such as laundry rooms,
• DO NOT unplug unit while operating.
• DO NOT place foreign objects on unit.
• DO NOT operate A/C with wet or damp hands.
• DO NOT allow chemical substances to come into contact with unit.
• DO NOT operate A/C in the presence of flammable substances or vapors
• Use control panel to start and to stop the unit. DO NOT USE PLUG.
• Turn off A/C and unplug from electrical outlet when not in use.
• Turn off and unplug unit from the electrical outlet prior to maintenance
• DO NOT use extension cord
• DO NOT unplug unit by pulling on the electrical cord. Keep electrical cord
• Filters must be used with product at all times. When filters are removed
• Routine maintenance ensures unit efficiency. If not completed, unit output
• DO NOT operate unit with a damaged power cord or plug, after a
• Use only in the upright position on an even, flat surface. Unit must be
• Stop operation immediately if abnormal noise or odor is detected. Contact
• This appliance must be used safely and with supervision. Keep away
• Appliance must be installed in accordance with local regulations.
• If supply cord is damaged, it must be replaced by the manufacturer,
for at least 3 hours prior to initial use.
rating / capacity.
(113°F) depending on thermostat setting.
to avoid risk or electrical shock.
such as alcohols, pesticides or gasoline.
or transport.
away from heat sources and completely unroll cord to avoid overheating. If
power cord is damaged, contact a qualified electrician or service agent to
replace it, in order to avoid hazard or injury.
for maintenance, verify that unit has been turned off and unplugged from
the electrical outlet.
performance and efficiency will decrease and energy consumption will
increase.
malfunction, or has been dropped or damaged.
positioned at least 24 inches (60 cm) from the nearest object in any
direction.
a local service center.
from children or unauthorized users. Never leave unattended.
service agent, or qualified personnel to avoid hazard.
1
globalindustrial.ca
Manuel de l'utilisateur
Service à la clientèle
Canada: 888-645-2986
011119
Tabla de contenido
loading

Resumen de contenidos para Global 292660

  • Página 1 • Place A/C on even, level surface at all times. • Ensure unit is connected to a grounded power supply of the correct Models rating / capacity. 292660 • Unit will cool when room temperature is between 18°C (64°F) ~ 45°C 292661 (113°F) depending on thermostat setting.
  • Página 2 Industrial Portable AC User's Manual SPECIFICATIONS 292660 292661 292662 292663 292845 292846 Single Phase, Single Phase, Single Phase, Single Phase, Single Phase, Single Phase, Power, Phase-V-HZ 115V, 60Hz 115V, 60Hz 208/230V, 60Hz 208/230V, 60Hz 208/230V, 60Hz 208/230V, 60Hz Cooling Capacity, BTU/h...
  • Página 3 After unpacking the unit, carefully inspect contents for any loose, missing, or damaged parts that may have occurred during transit. Cool air outlet hose Top fan exhaust flange Models: 292660, 292661 & 292662 Display/Control board COMPONENT PARTS Evaporator/filter Cool air outlet hoses...
  • Página 4: Spring Replacement

    Industrial Portable AC User's Manual Installation 7. CURRENT TEMP: Displays current room temperature in display in Fahrenheit. WARNINGS REGARDING PROPER LOCATION FOR INSTALLATION (In Room Cool Mode only). SPOT/COOL Mode – Displays outlet (cool air) temperature during normal operations. In order to change °F to °C, press WARNING: Do not use the unit in explosive environments or in areas where SPOT/COOL and ROOM/COOL buttons together for 2 seconds.
  • Página 5: Alarm Display

    Industrial Portable AC User's Manual There are two springs on the rear or condensate water tank guide. SELF-DIAGNOSTIC CODES (See Table 1) 1. Release screw on spring hook. The alarm light is activated if abnormal operation occurs and 2. Take off spring hook and pull out opposite spring hook from hole in a code is displayed on the control panel.
  • Página 6 Industrial Portable AC User's Manual Wiring Diagram - 292660/292662 POWER 1P AC 115V POWER 1P AC 208V/230V DRAIN PUMP (option) Wiring Diagram - 292661 Power 1P AC 115V 1P AC 208 / 230V RELAY RELAY DRAIN PUMP (option)
  • Página 7 Industrial Portable AC User's Manual Wiring Diagram - 292663 RELAY RELAY DRAIN PUMP (option) Wiring Diagram - 292845 January...
  • Página 8: Troubleshooting Chart

    Industrial Portable AC User's Manual Wiring Diagram - 292846 Troubleshooting Chart Symptom Possible Cause(s) Corrective Action High water level in condensate tank 1. Remove blockage from drain Water Leakage 2. Remove any obstruction under black panel or water tank 3. Empty condensate tank 1.
  • Página 9 • La unidad se enfría cuando la temperatura ambiente es de 18°C (64°F) ~ 45°C (113°F) dependiendo del ajuste del termostato. Modelos • NO utilice el acondicionador de aire para funciones distintas de las 292660 descritas en este manual. • NO incline la unidad. 292661 •...
  • Página 10: Especificaciones

    Manual del usuario Acondicionador de Aire Portátil Industrial ESPECIFICACIONES 292660 292661 292662 292663 292845 292846 Monofásico Monofásico Monofásico, Monofásico, Monofásico, Monofásico, Potencia, Fase-V-HZ 208/230V, 60Hz 208/230V, 60Hz 115V, 60Hz 115V, 60Hz , 60Hz , 60Hz 208/230V 208/230V Capacidad de 13200...
  • Página 11 Mangueras de salida de aire fresco pueden haber resultado durante el transporte. Brida de escape superior del ventilador Modelos: 292660, 292661 & 292662 Pantalla de exhibición/control PARTES COMPONENTES Evaporador/filtro Barra de guía para el tanque de condensación...
  • Página 12: Instalación

    Manual del usuario Acondicionador de Aire Portátil Industrial botón inferior baja la temperatura. Instalación 6. ALARMA: Luces indicadoras de alarma (parpadean) e indican un ADVERTENCIAS REFERENTES A LA UBICACIÓN ADECUADA PARA LA INSTALACIÓN funcionamiento anormal del sistema. Si se produce una alarma, el compresor se detiene.
  • Página 13: Sustitución Del Resorte

    Manual del usuario Acondicionador de Aire Portátil Industrial SUSTITUCIÓN DEL RESORTE (Ver Figura 10) en la guía del tanque de agua de condensación. 3. Reemplace con un reosrte nuevo en orden inverso. 4. Repita este ciclo para el otro resorte. CÓDIGOS DE AUTODIAGNOSTICO (Ver Tabla 1) La luz de alarma se activa si se produce una anomalía y un código aparece en el panel de control.
  • Página 14 Manual del usuario Acondicionador de Aire Portátil Industrial Esquema de conexiones - 292660/292662 POWER 1P AC 115V POWER 1P AC 208V/230V DRAIN PUMP (option) Esquema de conexiones - 292661 Power 1P AC 115V 1P AC 208 / 230V RELAY RELAY...
  • Página 15 Manual del usuario Acondicionador de Aire Portátil Industrial Esquema de conexiones - 292663 RELAY RELAY DRAIN PUMP (option) Esquema de conexiones - 292845 January...
  • Página 16: Tabla De Solución De Problemas

    Manual del usuario Acondicionador de Aire Portátil Industrial Esquema de conexiones - 292846 Tabla de solución de problemas Síntoma Posibles causas Acción correctiva Alto nivel de agua en el tanque de 1. Retire la obstrucción del desagüe Fuga de agua condensación 2.
  • Página 17 à la terre de la bonne tension/capacité. Modèles • L’unité refroidira lorsque la température ambiante se trouve entre 18 °C 292660 (64 °F) ~ 45 °C (113 °F), selon le réglage du thermostat. 292661 • N’utilisez PAS le climatiseur pour d’autres fonctions que celles décrites dans ce manuel.
  • Página 18 Manuel de l'utilisateur Climatiseur Portatif Industriel CARACTÉRISTIQUES 292660 292661 292662 292663 292845 292846 Monophasé, Monophasé, Monophasé, Monophasé, Monophasé, Monophasé, Puissance, phase V-Hz 115V, 60Hz 115V, 60Hz , 60Hz , 60Hz 208/230V, 60Hz 208/230V, 60Hz 208/230V 208/230V Capacité de 13200 16800...
  • Página 19 Tuyaux de sortie d’air frais a pu se produire pendant le transport. Bride d’échappement du ventilateur supérieur. Modèles: 292660, 292661, 292662 Affichage/Tableau de contrôle Filtre/Évaporateur COMPOSANTS Barre de guidage pour réservoir d’eau Tuyaux de sortie d’air frais...
  • Página 20 Climatiseur Portatif Industriel Manuel de l'utilisateur sur le bouton SET TEMP pour régler la température ambiante. Le bouton Installation supérieur est pour augmenter la température et le bouton inférieurs pour AVERTISSEMENTS CONCERNANT L’EMPLACEMENT CORRECT POUR L’INSTALLATION l’abaisser. 6. ALARME : Indicateurs d’alarme (clignotent) et indique un fonctionnement ATTENTION : N’utilisez pas l’appareil dans des environnements explosifs ou anormal du système.
  • Página 21: Remplacement Du Ressort

    Climatiseur Portatif Industriel Manuel de l'utilisateur du trou dans le guide du réservoir d’eau des condensats. REMPLACEMENT DU RESSORT (voir la Figure 10) 3. Le remplacer par un nouveau ressort dans l’ordre inverse. 4. Répéter ce cycle pour l’autre ressort. LES CODES D’AUTODIAGNOSTIC (voir tableau 1) Le voyant d’alarme est activé...
  • Página 22 Climatiseur Portatif Industriel Manuel de l'utilisateur Schéma de câblage - 292660/292662 POWER 1P AC 115V POWER 1P AC 208V/230V DRAIN PUMP (option) Schéma de câblage - 292661 Power 1P AC 115V 1P AC 208 / 230V RELAY RELAY DRAIN PUMP...
  • Página 23 Climatiseur Portatif Industriel Manuel de l'utilisateur Schéma de câblage - 292663 RELAY RELAY DRAIN PUMP (option) Schéma de câblage - 292845 January...
  • Página 24 Climatiseur Portatif Industriel Manuel de l'utilisateur Schéma de câblage - 292846 Tableau de dépannage Symptôme Cause possible(s) Mesures correctives Niveau d’eau élevé dans le réservoir des 1. Retirer l’obstruction de la vidange Fuites d’eau condensats 2. Retirer toute obstruction sous le panneau noir ou le réservoir d’eau 3.

Este manual también es adecuado para:

292661292662292663292845292846

Tabla de contenido