Idiomas disponibles
Idiomas disponibles
point to the arrow on the filter holder
filter
clockwise in the direction of the symbol.
16
9. Place the dirt bin
- First, position the contacts on the bottom of the dirt bin
onto the contact pins on the bottom of the motor unit
Move the two locks on the motor unit
the dirt bin
- Press the top of the dirt bin
until the lock audibly clicks into place. The dirt bin
securely attached to the motor unit
Cleaning the brush attachment
To achieve the best results, the rotating brush attachment
regularly checked for blockages and free of hair, fringes and dirt.
For simple cleaning, you can remove the brush from the brush
attachment
:
6
1. If you have not yet done so, remove the brush attachment
from the suction opening.
2. Move the release switch
in the direction of the arrow as far as it will go. You can now
remove and clean the brush.
3. To insert the brush after cleaning, proceed as follows:
- First, insert one end of the brush onto the oscillating shaft on
the opposite side of the release switch. Please note that only
one side of the brush fits onto the oscillating shaft.
- Now, insert the other end of the brush into the corresponding
notch on the other end of the release switch.
- Move the release switch
to secure the brush. The brush should now be secured on the
brush attachment
Mini Vacuum cleaner | Mini Aspiradora | Mini Aspirador
back on the motor unit
18
:
18
on the top of the motor unit
18
below the brush attachment
5
in the direction opposite the arrow
5
.
6
. Turn the HEPA
17
:
14
18
:
14
into the notches on
14
is now
18
:
14
should be
6
EN
14
6
6
17
