Idiomas disponibles
Idiomas disponibles
mount
7
• Do not operate the appliance while charging.
Operating
• The suction opening should always be open and not blocked as
blockages lead to overheating and damage to the motor.
• Please make sure that the HEPA filter
appliance.
• Never vacuum liquid.
• Please note that if the rotating brush attachment
prevents the brush from turning, the appliance shuts off. The charge
indicator light
this case, remove the blockage as described in the "Cleaning the
brush attachment" chapter. Move the on/off switch
position and then to position I or II to start using the appliance again.
1. Remove the appliance from the wall mount
are not using the wall mount
connector
2. Insert the nozzle you would like to use into the suction
opening. For more information, see chapter "Using the
accessories".
3. To turn the appliance on, move the on/off switch
to position I (= low setting) or position II (= high setting).
The charge indicator light
green on setting II. The operating light
4. To turn off the appliance, move the on/off switch
the "OFF" position. All lights turn off.
14
and insert it into the socket on the appliance.
flashes red, and the operating light
12
from the socket.
9
is inserted before using the
16
is jammed and
6
turns off. In
15
to the "OFF"
11
or, if you
7
, unplug the coaxial power
7
lights up yellow on setting I and
12
lights up.
15
forward
11
back to
11
