(2)
(3)
(4)
(5)
The PROGRAM indicator lights when the program button (PROGRAM)
is pressed.
Next,
use
the
number
buttons
and
the
+10
button
to
program
the tracks.
To program tracks 3, 12, and 7, for example, press [PROGRAM _],
F
C+10), 2], and 2).
The
track
number
lights on
the
calendar
each
time
a track
is
programmed.
The number
of tracks programmed
is displayed at the
index display, and the total playing time for the programmed tracks is
indicated at the time display. After the tracks are programmed, the total
number of programmed tracks is displayed at the track number display,
and the total playing time for the programmed tracks is indicated at the
time
display.
Checking the Programmed Tracks
(Remote controi only)
(CALL)
Press the CALL button.
The
programmed
tracks are displayed
in order on the TRACK
NO.
display each time the CALL
button
is pressed.
Playing the Programmed
Tracks
(PLAY)
Press the (PLAY) button to play the tracks in the programmed order.
Correcting Programs
(Remote contro! only)
(Number
buttons)
(CLEAR)
To
correct
a programmed
track, first press the CLEAR
button, then
Program
the correct
track.
The
last track programmed
is replaced
with the correct track.
To ciear a track in the middie of the program, use the CALL button to
call out that track, then
press the CLEAR
button to clear it from the
Program.
Clearing the Entire Program
Press the DIRECT
button
to clear the entire
program.
The entire
Program can also be cleared by pressing the OPEN/CLOSE
button.
lf the
DIRECT
button
is pressed
during
programmed
playback,
the
Program
mode
is cleared
and norma!
playback
continues
from that
track
on.
6
Playing All Tracks Repeatedly
.............:ccceeseseeeees
Repeat Piayback
NOTES
e
Ifthe programming operation is performed in the play or pause
mode, the current track is programmed as the first track in the
program.
Other
programs
can
be added,
but the
number
of
programmed
tracks and playing time will not be displayed.
e
Direct
search
is not
possible
during
programmed
playback.
Pressing
the
number
buttons
adds
tracks
to the
end
of the
program,
e
Programming is also possible when the disc holder is open. A
track number greater than the number of tracks on the disc can
be set in the program, but it will automatically be cleared from
the program
before
playback
starts.
e
The remaining time per track can only be displayed for the first
20 tracks on the disc.
e
The total program time and remaining program time as well will
not be displayed if tracks numbers greater than 20 are prog-
rammed.
{Remote control only)
{ > PLAY)
PEAK
TE
DISPLAY
(REPEAT)
Press the REPEAT
button. The REPEAT
indicator lights.
The operation
is the same
whether
button
@
or
@
is pressed first.
The one-track repeat mode is set if the REPEAT button is pressed again
during
repeat
playback.
The all-track repeat mode
is set even
if the REPEAT
button
is pressed
during
playback.
To cancel
the repeat
mode,
press the
REPEAT
button
twice.
If the REPEAT
button
is pressed
during
programmed
playback,
the
tracks
are
repeated
in the programmed
order.
