5. TROUBLE SHOOTING
Before you call for service review the trouble shooting tips first.
Problem
No power to juicer.
Motor has stopped.
16
Leaking from beneath
the bowl.
EN
Stain on the bowl,Stra-
iner, Spinning brush.
Squeaking noise
during operation.
Damage to the strai-
ner.
Possibles causes
Juicer not plugged in.
Incorrect assembly.
Bowl has been overfilled with material or any
high hardness element has been introduced.
Overuse has caused the motor to shut down
as a precaution to overheating.
Red rubber plug on base of bowl not correct-
ly inserted.
Natural color from juicing materials.
Juicing noise from squeezing screw.
Frozen foods, ice, pips, seeds, unknown subs-
tance or too much material in the bowl.
What to do
Check the juicer is
plugged in.
Reassemble the jui-
cer according to the
instructions.
Press
the
reverse
power button to try
and clear the clog.
May need to be try
this a few times.
Switch off and let
the motor cool befo-
re using again.
Rubber plug on base
of bowl not correct-
ly inserted.
This is perfectly nor-
mal. To reduce disco-
loration ensure you
rinse and clean the
appliance immedia-
tely after use.
This
is
perfectly
normal. Ensure you
do not overload the
juicer.
Ensure you read the
instructions carefu-
lly on the correct use
of the juicer. Do not
overfill the juicer.