Idiomas disponibles
Idiomas disponibles
Adjustment Item Screen
3 CONTRAST (White level)
Adjust the screen contrast. Pressing the
[2
key toggles between BRIGHTNESS,
BACKLIGHT, and CONTRAST.
Note:
If the "3" and "B" keys are pressed at the same time, the maximum level (100) will be set.
:Q:,
BRIGHTNESS (Black level)
Adjust the brightness (low gradation part; black level). Pressing the
(2
key toggles between
CONTRAST, BACKLIGHT, and BRIGHTNESS.
Note:
If the "3" and "B" keys are pressed at the same time, the standard level (50) will be set.
-:p:-2 BACKLIGHT
Adjust the brightness of the backlight. Pressing the [1] key toggles between CONTRAST,
BRIGHTNESS and BACKLIGHT.
Direct operation:
Even if the menu screen does not appear, the backlight can be adjusted by pressing the "3"
or "B" keys.
Note:
If the "3" and "B" keys are pressed at the same time, the standard level (100) will be set.
PICTURE
Image quality can be set to four different modes to match the type of input.
1) Press the "3" and "B" keys to select 1 (PICTURE 1: text), 2 (PICTURE 2: standard), 3
(PICTURE 3: graphic) and 4 (USER).
2) [2 will be displayed at the bottom right-hand side of the on-screen panel when 4 (USER)
has been selected.
Press the [2] key on the front operation area to enter the USER adjustment screen.
USER
Adjust the gamma correction and edge enhancement of the image to suit personal preference.
1) Select GAMMA or SHARPNESS with the
[2
key.
2) Adjust the image quality to match personal preference with "3" and "S" keys.
COLORTEMP
Switch the whiteness of the image.
1) Press the "3" and "B" keys to select 1 (Normal color), 2 (9300 K), 3 (7500 K), and 4
(USER).
2) [2] will be displayed at the bottom right-hand side of the on-screen panel when 4 (USER)
has been selected.
Press the [2 key on the front operation area to enter the User color adjustment screen.
USER COLOR
Adjust the whiteness of the image to suit persona! preference.
1) Select R (red), G (green), B (blue) with the
[2
key.
2) Adjust the color to match personal preference with "3" and "B" keys.
Note) Make a note of the setting values before performing the adjustment because the
recall operation cannot be performed for the user color adjustment. The initial value
is set to normal color.
15
