Idiomas disponibles
Idiomas disponibles
Parts & Accessories
Using the Rotisserie Set
1.
If the Divider is inside the appliance, remove the Divider. Do not use the Divider when
using the Rotisserie Set.
2.
Carefully slide the Rotisserie Shaft through the center of the food lengthwise.
3.
Slide the Forks onto each side of the Spit and secure them in place by tightening the two
Set Screws. To support the food on the Rotisserie Spit better, insert the Rotisserie Forks
into the food at different angles (see Fig. E).
4.
Hold the assembled Rotisserie Spit at a slight angle with the left side higher than the right
side and insert the right side of the Spit into the Rotisserie connection inside the appliance
(see Fig. F).
5.
With the right side securely in place, lower the left side of the Spit into the Rotisserie
connection on the left side of the appliance (see Fig. G).
Fig. E
14
TO68D5Series_30279_ES_IB_A.indd 14
TO68D5Series_30279_ES_IB_A.indd 14
Fig. F
11/1/23 10:25 AM
11/1/23 10:25 AM
