Ideal ID5901 Instrucciones De Uso página 10

INSTRUCTION MANUAL
VACUUM CLEANER ID5901
• GENERAL DESCRIPTION
1. Large brush
2. Telescopic tube
3. Telescopic tube adjustment
4. Adjusting air flow
5. Hand grip
6. Hose
7. Socket
8. Dust container
9. Dust container lid
10. Dust container lid lock
11. Safety element
12. Internal filter
13. Space for external filter
• TECHNICAL DATA
- power: 700 W
- supply voltage: 220-240V~ 50-60Hz
- container capacity: 1,5 l
• INTENDED USE
The ID5901 vacuum cleaner is intended to clean dust from carpets, padded carpets, sheer curtains, curtains,
and upholstered furniture. The appliance is equipped with a transparent container that enables easy
monitoring of the accumulated dust.
• USE
- Before using the device, make sure that the device, plug and power cord are in working order and that
all parts of the packaging have been removed.
- Before use, check that the device is complete and not damaged.
- The vacuum cleaner can be carried using the handle (14).
• OPERATION
- Before starting work, check that the filters (12, 19) and the container (8) are installed - fig. 1.
NOTE. Do not use the vacuum cleaner without filters (12, 19) and container (8) installed.
- Insert the end of the hose (6) into the socket (7) - fig. 2.
- Then connect the tip (5) to the telescopic tube (2) - fig. 3.
- On the other end of the pipe (2), install the corresponding tip (1, 22, 23, 24) - fig. 4.
- Adjust the length of the telescopic tube (2) with the button (3).
- Grab the plug and pull the power cord to the desired length.
NOTE. The cable can be pulled out to the maximum up to the yellow marker - fig. 5.
In no case pull the cable out to the red marker, because you can damage the cable retractor
mechanism in this way.
- If the cable is pulled beyond the yellow marker, retract it using the button (17).
- Plug the power cord into an outlet with the parameters as specified in the instructions.
- The vacuum cleaner starts working after pressing the switch (16).
- During vacuuming, you can change the suction power with the regulator (4).
- Observe the state of filling of the container (8), if the level of 2/3 of the height of the container has been
reached, the container (8) should be emptied (see EMPTYING THE CONTAINER).
NOTE. Do not vacuum if the level of 2/3 of the height of the container (8) has been reached.
10
14. Handle
15. Dust container lock
16. Switch
17. Cord retractor
18. Socket for brush
19. Exhaust filter
20. Exhaust filter cover
21. Outlet filter slot
22. Dual-function nozzle
23. Round brush
24. Small brush
25. Body
EN