Turning this option on causes taking a 3 pictures instead of standard, single
pic.
d. Quality
Set the picture quality.
e. Sharpness
Set the sharpness of taken pictures.
f. White balance
Set the white balance of the pictures.
g. Color
Set the color of the pictures (normal/intense/faded).
h. ISO
Set the ISO value.
i. Exposure
Set the exposure of the pictures.
j. Picture stabilization
Eliminates the blur of the pictures in motion.
k. Quick preview
Set if and after what time after taking a picture a preview of ones should be
displayed and how long should it lasts: 2 / 5 seconds.
l. Date stamp
Turning on / off the date stamp on the pictures.
3. PLAYBACK MODE
a. Delete
Deletes the chosen file.
b. Protect
Protects the chosen file from being overwritten.
c. Slide show
Preview of the recorded files. You may set when every next file should be
displayed ( 2 / 5 / 8 seconds).
4. MAIN MENU
a. Screen saver
Set if and after what time the screen saver should be on. We may also do it
manually by pressing the POWER button.
b. Automatic shutdown
Set if and after how many mintues of standby, the camera should be turned
off. Please remember to turn this option off when leaving the parked car in
parking mode.
c. Frequency
Set the frequency. Choose between 50Hz and 60Hz - recommended setting:
16
50Hz.
d. Keys sound
Enable / disable the sound of keys on the device.
e. Language
Set the language in the camera.
f. Date / time
Set the date stamp in the device.
g. LED light
Set the LED light, which improves the night vision. It may be turned on / off
/ set automatically during bad lighting conditions.
h. Format
Format of the micro SD memory card in the device.
NOTE: When formatting all data and files will be deleted from the memory
card.
i. Default settings
Restore the default settings on the device.
j. Version
Software version
05. FAQ
1. Device does not switch on, screen flashes.
Before switching on, charge the device battery and check the connection in the
cigarette lighter socket.
2. The device does not switch on/off automatically.
The reason for this behaviour may be the constant power supply in the car
lighter socket.
3. The camera stops recording / does not overwrite recordings.
Check: G-SENSOR - a function by which recordings with recorded overloads (e.g.
uneven pavement, braking, driving off a kerb or over a speed bump, etc.) are
protected from being overwritten. If you use this function, you must periodically
format the memory card on your computer and then on the camera. Ultimately,
each file on the data carrier will be protected from being overwritten and the
device will not be able to record a further route - it will not record in a loop. We
suggest setting the sensor according to your driving style and road conditions.
You can also disable the option completely, in which case each oldest file will
be overwritten and the card will not need to be formatted periodically. After
adjusting the function, remember to format the memory card.
4. The camera turns on and off.
Check: PARKING MODE/MONITOR and MOVEMENT DETECTION - function
designed to operate while the vehicle is parked. You should deactivate the func-
tions, before setting off, as they may cause the camera to switch on and off and
17