Idiomas disponibles
Idiomas disponibles
EN
2. Press the plus button to enter the selection interface
of "02P".
3. Press the parameter setting button to enter
parameter modification area (located at the bottom
of the display).
4. Press the plus/minus button to select desired unit
preference.
Note:
"00": metric system (km/h)
"01": imperial system (mile/h)
5. Press the parameter setting button to save the new
unit preference.
English (Original Instructions)
6. Press and hold the parameter setting button for
more than two seconds to exit.
5.4
TRIP DISTANCE RESET
The display can record single trip mileage and total
mileage. It is able to clear the single trip mileage, but
not able to clear total mileage.
1. Press and hold both the parameter setting button
and minus button for more than two seconds to
reset the trip distance.
5.5
FACTORY RESET
1. Press and hold both the plus and headlight buttons
for more than two seconds to enter the factory reset
interface.
2. Press the plus/minus button to select "dEF-y".
Note:
"dEF-0": Device will be factory reset.
"dEF-n": Factory settings will not be restored.
"dEF-y": Factory setting will be restored.
3. Select "def-y" using the plus/minus button. Then
press the parameter setting button to confirm.
4. The display will show "dEF-0" and automatically
begin to restore the factory default settings.
18
