ENAR GEEL 10 Manual De Operación página 61

Idiomas disponibles

Idiomas disponibles

5.9 GENERATOR CONTROL
To start generator, turn the engine switch on the control panel to ON. Or press it to
Procedure
START if it's electrical start state, then generator unit can be started. In order to extend
the service life of the storage battery, do not press on the switch for more than 3 seconds
and the interval between two pressings should be longer than 10 seconds.
To start the engine pull the starter grip lightly until resistance is felt then pull briskly.
Recoil Starter
en
Notice: Do not allow the starter grip (a) to snap back against the engine. Return it gently
to prevent damage to the starter.
WARNING
It may be causing the dangers of injury by the sudden change of rotation direction of the
engine during operating the recoil starter.
PORTABLE GENERATOR
GEEL
23
GEEL 3, GEEL 5, GEEL 7
loading

Productos relacionados para ENAR GEEL 10

Este manual también es adecuado para:

Geel serieGeel 3Geel 5Geel 7