Operating Controls - HAEGER PR-BIB.004B Instrucciones De Uso

English
•
Only connect the device at a properly installed plug socket. Pay attention that the specified
voltage corresponds to the voltage of the plug socket.
•
Never open the housing of the device. Incorrect repairs can constitute a considerable risk
for the user. Should the device become damaged, in particular the mains supply cable, do
not operate the device any longer, but rather have it repaired by a technician. Check the
mains supply cable regularly for damage.
•
If the device is not used for a longer period, remove the plug connector from the plug
socket or take out the batteries.
•
In order to ensure your children's safety, please keep all packaging (plastic bags,
boxes, polystyrene etc.) out of their reach.
•
Caution! Do not allow small children to play with the foil as there is a danger of
suffocation!
•
To protect children from the dangers posed by electrical appliances, make sure
that the cable is hanging low and that children do not have access to the
appliance.
IMPROVING THE RECEPTION
FM: Extend the telescopic antenna and adjust the angle for optimum reception.
MW/AM: Rotate the unit horizontally for optimum reception. A ferrite bar antenna is
built into the unit.
Note: Adjust the direction of the antenna by holding the bottom of it. The antenna
can be damaged when you move the antenna with excessive force.

OPERATING CONTROLS

1. HANDLE
3. TUNING KNOB
5. FM/AM BAND SWITCH
7. EARPHONE JACK 3.5mm
9. BATTERY COMPARTMENT
AC POWER SUPPLY
•
Connect the mains lead supplied to a properly installed socket 230V / 50 Hz and
to the AC~ mains connexion on the left-hand side of the device.
•
Ensure that the voltage is the same as that indicated on the model identification
plate.
2
2. TELESCOPIC ANTENNA
4. SPEAKER
6. VOLUME CONTROL ON/OFF KNOB
8. AC SOCKET
Instructions for use