ANSMANN 1600-0605 Manual De Operación página 5

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
EN ORIGINAL OPERATING INSTRUCTIONS
TECHNICAL DATA
Illuminant:
10x 0.2W RGB LEDs
Battery life:
15 hours
Storage temperature:
-10 °C – 50 °C
Operating temperature:
-10 °C – +25 °C
Dimensions:
32 x 5 x 24.2 cm
Weight:
394 g
Incl.:
3x AA batteries / 1x Micro-USB to USB-A cable /
6x pens
1x cloth / 20x drawing templates /
1x instruction manual and warranty card
INFORMATION
First unpack all parts and check that everything is there and that nothing is damaged. Do not
use damaged products. If you find damage on the product, contact your dealer.
SAFETY - EXPLANATION OF NOTES
Please take note of the following symbols and words used in the operating instructions, on
the product and on the packaging:
= Information | Useful additional information about the product
= Note | This note warns you of possible damage of all kinds
= Caution | Attention - Hazard can lead to injuries
= Warning | Attention – Danger! May result in serious injury or death
GENERAL SAFETY INSTRUCTIONS
§ This product may be used by chil-
dren from the age of 8 and by per-
sons with reduced physical, sensory
or mental abilities or lack of expe-
rience and knowledge, if they have
been instructed on the safe use of
the product and are aware of the
hazards. Children are not permitted
to play with the product. Children are
not permitted to carry out cleaning
or care without supervision.
§ Keep the product and the packaging
away from children. This product is
not a toy. Children should be super-
vised in order to ensure that they do
not play with the product or packa-
ging.
§ Avoid eye injuries - Never look
directly into the beam of light or
shine it into other people's faces.
If this occurs for too long, the blue
light portion of the beam can cause
retinal damage.
§ The item contains small parts which
can be swallowed.
§ Do not use the pens on other surfa-
ces.
§ Avoid body contact with the paints.
§ Do not expose to potentially explo-
sive environments where there are
flammable liquids, dusts or gases.
§ Never submerge the product in wa-
ter or other liquids.
§ All illuminated objects must be at
least 10cm away from the lamp.
§ Use the product exclusively with the
accessories included with it.
§ Improperly inserted batteries could
leak and/or cause a fire/explosion.
§ Keep batteries away from children:
Risk of choking or suffocating
§ Never try to open, crush or heat a
standard/rechargeable battery or
set it on fire. Do not throw into a fire.
§ When inserting batteries, ensure
that the batteries are inserted with
the correct polarity.
§ Leaking battery fluid can cause
irritation if it comes into contact with
the skin. Immediately rinse affected
areas with fresh water and then
seek medical attention.
§ Rechargeable batteries must only be
charged under the supervision of an
adult and must be removed from the
device before being charged.
§ Never expose the product to ext-
reme conditions, such as extreme
heat/cold etc.
GENERAL INFORMATION
§ Do not throw or drop.
§ The LED cover cannot be replaced. If the cover is damaged, the product must be disposed
of.
§ The LED light source cannot be replaced. When the LED comes to the end of its service
life, the complete lamp must be replaced.
§ Do not open or modify the product! Repair work shall only be carried out by the
manufacturer or by a service technician appointed by the manufacturer or by a similarly
qualified person.
BATTERIES
§ Always change all of the batteries at the same time as a complete set and always use
equivalent batteries.
§ Do not use batteries if the product appears to be damaged.
§ Batteries are not rechargeable. Do not short-circuit batteries.
§ Switch the product off before changing the batteries.
§ Remove used or empty batteries from the lamp immediately.
INSERTING THE BATTERIES
When inserting batteries, ensure that the batteries are inserted with the correct polarity.
Switch the product off before changing the batteries.
CARE AND MAINTENANCE
Cleaning
§ Carry out cleaning tasks only when the mains plug has been pulled out / when the power
supply has been disconnected
§ Clean the product only with a slightly damp cloth, then rub it dry
§ Do not use abrasive agents or solvents for cleaning.
§ Never submerge the product in water or other liquids.
§ Do not allow fluids to enter the housing.
§ Do not use hard brushes or sharp objects for cleaning.
MAINTENANCE
If the product is not going to be used, remove the batteries and store separately in order to
preserve service life.
ENVIRONMENTAL INFORMATION | DISPOSAL
Dispose of packaging after sorting by material type. Cardboard to the waste paper and film
to the recycling collection.
Dispose of the unusable product in accordance with legal provisions. The "waste
bin" symbol indicates that, in the EU, it is not permitted to dispose of electrical
equipment in household waste. Use the return and collection systems in your area or
contact the dealer from whom you purchased the product.
For disposal, pass the product on to a specialist disposal point for old equipment. Do not
dispose of the appliance with household waste.
5
loading