Specialized Allez Sport Manual Del Usuario página 13

6 .3 . REC OM ME N DE D T I RE PRES SURES
The tires must be inflated and periodically checked and re-inflated using a pump with an
accurate pressure gauge.
Pump the tires up to your desired pressure. Refer to the tire's sidewall for pressure range.
Check your wheel manual or decal on the rim itself to see if your wheels have a maximum
pressure limit. Do not exceed it.
WARNING! Never inflate a tire beyond the maximum pressure marked on
the tire's sidewall or the maximum pressure limit specified by the wheel
manufacturer, whichever is lower. Failure to follow this warning may cause
the tire to blow off the rim and may result in serious personal injury.
11
7. ASSE MBL ING YOU R AL LEZ E 5 DIS C
7.1. BOT TO M BRACK ET
The Allez E5 Disc frame uses a 68 mm standard BSA threaded design. Grease the threads.
Install and torque according to the bottom bracket manufacturer's instructions.
Before installing the bottom bracket and crank, make sure all housings and wires are routed
through the frame.
CAUTION: Do not face the bottom bracket shell! This can prevent proper
installation of the crank. Your Specialized frame does not require any bottom
bracket shell pre-installation preparation, as all surfaces have been precisely
machined to specific tolerances at the factory for proper interface with a
compatible crankset. Please refer to the manufacturer instructions for crank
and bottom bracket installation.
CAUTION: Always use a bottom bracket equipped with a sleeve between the
two cups. Running a bottom bracket without the sleeve can result in housings
and/or wires contacting the bottom bracket spindle, which can result in wear.