Idiomas disponibles
Idiomas disponibles
Attention! If the courier service has delivered your HELIKA® sink, please check your goods upon arrival. If any
of your items are damaged, note it on the courier's documents on-site. Take a clear photograph of the outer
packaging and the actual damage to the item received, and email them to the seller's customer service team
along with a description. Please be assured that goods damaged during transport will always be replaced if
reported to the seller within three days, and the goods have been signed for as damaged.
Before using your HELIKA® sink, please read the installation instructions carefully, adhere to the cleaning and maintenance instructions, and use your
new sink without any worries.
NOTE!
SAFETY MEASURES
Before assembly, please ensure that the item is in perfect condition and that all safety devices are functional.
authorized specialist company.
Connection parts must be installed carefully and checked thoroughly for leaks.
Suitable tools should be used for assembly.
Only adults should carry out the assembly, and children should be kept away from the area.
The brackets of the sink may be sharp-edged, so it is recommended to wear work gloves while installing to avoid injuries.
Before connecting the sink with the water jet, carefully check all connections for any damage, loose items, or other factors that can lead to a loss of
safety or leaks.
In case of damage or other abnormalities:
• If any irregularities or damage occur after installation during everyday use or maintenance, stop using the sink immediately to prevent any risk of
injury.
TECHNICAL DATA
Product Description:
wastewater (PWD). The top-mounted HELIKA® sinks come with a drilled hole (35mm) for tap installation, ensuring a supply of hot and cold water. The
CONFORMANCE WITH EU DIRECTIVES
This product bears the CE marking and ensures that the HELIKA® sink is manufactured according to the
relevant requirements of the EN 13310:2015+A1:2018 standard.
Product Material:
binding agent. The granite surface is heat-resistant, scratch-proof, can withstand sudden changes in water
chemical cleaning products, and dyes.
ASSEMBLY OF THE PRODUCT
These instructions are for the installation of sinks that are placed on the kitchen
countertop only.
Before installing the product, ensure that it is not damaged in any way.
STEP 1
underneath it. Attention! Templates are supplied only as a guide. The actual use of the sink will ensure a more
accurate cutout.
STEP 2
adhesive tape. Then trace the template with a pencil.
STEP 3
Drill a hole of 10 mm in each corner.
STEP 4
Using a reciprocating saw, cut the sink hole.
STEP 5
Apply sanitary silicone along the edge of the hole. Make sure it is evenly covered.
STEP 6
Place the sink in the hole. Check that the sink is positioned correctly.
STEP 7
anchored. Do not use electric drills or other devices without a torque regulator.
STEP 8
Carefully remove any excess silicone from the countertop and sink's surface. Add water to the sink and
allow the sealant to dry completely for 5 hours.
Note. As part of continuous product improvement and technology, there may be minor deviations in design,
operation, or the range of functions. However, this does not result in a defect in the product. Therefore, a
UAB Compotexa | Taikos pr. 88A, LT-51183 Kaunas, LITHUANIA | e:mail: [email protected] | tel: + 370 +370 (681) 01250 | www.helika-sinks.com| REV. January 8, 2023
Thank you for purchasing HELIKA®.
3
UAB COMPOTEXA
Taikos pr. 88A, LT-51183 Kaunas
Lithuania
21
DoP No.COM-D-10
Intended Use:
Prepara on of food, washing of dishes
and discharge of domes c
wastewater (PWD)
EN1330:2015
Cleanability (CA) - Durability (DA)
EN
