Idiomas disponibles
Idiomas disponibles
If a slave flash unit does not issue a test flash, correct
the position of the slave flash unit to enable the slave
sensor
to receive the light sent by the master/con-
troller flash unit.
5.5 Video light
Use the video light to illuminate shots of moving images
at close range.
• Press button
briefly.
The flash unit always switches on afterwards with the
mode of operation that was used last.
• Press the "LED" button
on the video light. Each time you press the "LED"
button
, the light output switches between "full"
and "half"
If the "LED" button
k
set the full light output; if it blinks slowly, the light output
is set to half.
If the batteries are almost empty, the video light
switches off and the "LED" button
96
on the flash unit to switch
lights up continuously, you have
blinks quickly.
6 Flash techniques
6.1 Bounce flash
Bounce flash illuminates the subject more softly and
reduces dense shadows. It also reduces the drop in light
from foreground to background that occurs for physical
reasons.
The flash unit can be tilted vertically for indirect flash.
To avoid colour cast in your shots, the reflective surface
should be colour-neutral or white.
The flash unit can be tilted via a hinge in the mounting
foot. There are 4 different stop positions:
- 0° / "lying" on the camera
First close-up range position, also for transport
- 20°
Second close-up range position
- 40°
Normal position (unit flashes in the direction of the
optical axis)
- 90° / main body is vertical
Position for indirect flashes (diagonally upwards)
