WARNING
Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Removing
and Installing
Lower Plate
Locking
Latch
Tab
Loquet
de
sQrete
Broche
Guia de
Locki
Tab
Loquet
de
sQrete
Guia de
cierre
Fig. 1
•
F_ig.2
Base
inferior
Lenguetas
Before servicing any parts,
disconnect vacuum cleaner from
electrical
outlet.
Always place paper under nozzle
whenever lower plate is removed to
protect floor.
Place body in upright position and
turn vacuum cleaner over to expose
lower plate.
Release lower plate by pressing two
(2) latches and two (2) locking tabs
inward as shown. (Fig. 1)
Remove lower plate and remove any
residue that may exist in belt area.
Reinstall lower plate by hooking front
end of lower plate into slots on front
of nozzle housing. (Fig. 2)
Lockil
Tab
Loquet
de
sQrete
Guia de
cierre
Tab
Latch
Loquet de
sQrete
Broche
Guia de
Fig. 3
Rotate lower plate until locking tabs
snap into place then push the two (2)
latches outward. (Fig. 3)
- 46 -
