Storage - ryan RENOVAIRE 744317A Manual Del Operador

RENOVAIRE
Storage Instructions
1. Thoroughly clean all tines, inside and out, after aerating is completed. A light coat of oil sprayed onto the
tines or blades will help prevent rust and ensure proper coring the next time the unit is put into service.
2. Unit should be stored on boards to protect tines or blades from rust and damage. Store in a dry location.
3. Lubrication before long storage periods will help prevent moisture build up in the lubrication cavities.
4. When bringing unit out of storage, check for loose bolts and damaged parts. Tighten and replace as
needed.
5. Check hydraulic cylinder for leaks and replace seal kit if needed. If the cylinder end cap has a
RETAINING RING, order item 25. If the cylinder cap has a LOCK WIRE, order item 30.
6. If the unit is equipped with a hydraulic hand pump, check the pump for leaks and proper fluid level.
Check the hydraulic hose connections for tightness and check the hose for any wear or damage. Refer to
the parts list on Page 14 to order replacement seal kits for the pump. The hydraulic hose can be obtained
by ordering item 10.
7. Proper storage and maintenance will extend the usage and performance of the unit.

STORAGE

9