Function; Inhibit Function - marposs MIDA TOOL EYE Manual De Instalacion Y Uso

ENGLISH

5.5 FUNCTION

5.5.1 Inhibit function

The Inhibit function allows you to disable touch signal processing. If set to TRUE (logic 1) the touch probe is
always not deflected (see CASES 1 and 2 in Figure 5-13).
TRUE
FALSE
Figure 5-13. Inhibit function cycle diagram.
N.B.: Ts = 44msec. nominal ± 30%;
N.B.
i
Once the operating logic mode (TRUE/FALSE) has been identified, check on the machine if you
need to work in SOURCE or SINK mode:
TRUE  high voltage
SOURCE MODE:
FALSE low voltage
The interface default setting is operation in SOURCE mode (see section 5.5.3 "Selecting SINK/SOURCE
operating mode (JP1)").
MIDA TOOL EYE-ELECTRIC
82
CASE 1: INHIBIT=FALSE
TRUE
FALSE
CASE 2: INHIBIT=TRUE
Td = 6.6 msec. nominal ± 10%.
TRUE  low voltage
SINK MODE:
FALSE high voltage