Idiomas disponibles
Idiomas disponibles
Change the Earhook
Earhooks come in large, medium and small
sizes. The smallest earhook can be made tamper
resistant.
Press firmly on the top of the Earhook
1
with your thumb and click it off the sound
processor.
Click the Earhook into place.
2
Note: Remove your Earhook only when necessary
– it may become loose if it is removed too often.
Assemble and change cables
See figure
21
Changing the cable is something you should
only have to do occasionally. Using the correct
method reduces the risk of accidentally damaging
the cable and the cable sockets in the Sound
Processing unit and the Actuator unit.
Remember to leave the Actuator unit connected
when storing the sound processor in the Dry &
Store unit overnight.
1
Hold the cable by the grips and firmly pull
it straight out of the socket on the Sound
Processing unit. Do not twist.
Hold the base of the plug and firmly pull the
2
cable.
To attach a new cable, push the cable plug into
3
the Actuator unit until it clicks into place.
4
Push the cable into the cable socket on the
Sound Processing unit until it clicks into place.
12
See figure
20
General processor care
Your Baha sound processor is a delicate electronic
device. Follow these guidelines to keep it in proper
working order:
• When not in use, turn off your sound processor
and store it free from dust and dirt.
• If you will not be using your sound processor
for a long period, remove the battery. Remove
your sound processor before applying hair
conditioners, mosquito repellent and or similar
products.
Water, sand and dirt
Your sound processor is resistant to water, sand
and dust. However, it is still a precision electronic
device so the following precautions should be
taken.
If your processor ever gets wet, dry it with a
1
soft cloth, change the microphone protectors
and place it in the dry aid kit for eight hours.
If sand or dirt ever enter the processor, shake
2
the components carefully to remove it and
change the microphone protectors.
See figure
11
