Idiomas disponibles
Idiomas disponibles
Do not plug the power cord with wet hands.
In order to ensure your children's safety, please keep all pack-
aging (plastic bags, boxes, polystyrene etc.) out of their reach.
WARNING! Never let children play with plastic film
or bags. Choking/asphyxiation hazard!
WARNING! Oils and fats may burn when overheated.
Please be careful!
PRESS GRILL OVERVIEW
1.
Grill base
2.
Top lid
3.
Non-stick heating plates
4.
Top lid slider latch
5.
Top lid handle
6.
Control panel
a. Power switch with LED indicator
b. control knob with button for the
bottom hot plate
c. control knob with button for the
top hot plate
d. delayed shut-off time setting
button "-","+"
Depending on the recipe and/or the grilled food product and/or its size or quantity, the press
grill can be used in two configurations:
- With the hot plates closed: the top and down sides of food products are grilled at the same time; the
food products are processed fast and with a well-controlled, nearly uniform doneness on both sides.
- With the hot plates open: this configuration is the next best thing to natural grilling on an open flame;
the grilling surface is two times bigger than when the hot plates are closed.
BEFORE FIRST USE
1. Unpack the press grill and remove all plastic bags, labelling stickers, filling materials and transport
locks.
2. Verify that the power ratings on the rating plate of the press grill match your power mains system.
3. Slide the top lid slider latch ❹ open to the 'OPEN' mark and lift the top lid ❷ open. The top lid
can be locked closed with the top lid slider latch at the 'LOCK' mark. Check if the heating plates ❸
are correctly mounted in the device. Unfold the folding feet (10) by pressing the lever located in
the feet socket.
WARNING! Never start the appliance without properly installed heating plates.
4. Clean the hot plates ❸ and the fat drip pan ❼ thoroughly with a wet cloth and wipe them dry.
5. Before grilling for the first time, the hot plates must be properly conditioned by running them hot.
Place the press grill on a firm, dry, level and smooth surface, plug the power cord to the mains, and
heat up both plates at 230°C for 5 minutes. The detailed description of how to use the control
panel, set the temperature and time can be found the "GRILL USE" chapter. After the process
e. bottom hot plate indicator light
f. top hot plate indicator light
g. delayed shut-off function time
display (TIME)
h. bottom hot plate set temperature
display
i. top hot plate set temperature
display
7.
Drip pan
8.
Bottom hot plate release button
9.
Top hot plate release button
10. Folding feet
EN
23
