Idiomas disponibles
Idiomas disponibles
Installing
Your Wine
Cellar
UHp_¢kiHg
y@u_ Wine
Ce/_
_
1. Remove all packaging
material. This includes the base and all adhesive tape
holding the wine cellar accessories inside and outside.
2. Jnsped and remove any renqams of packing, tape or printed materials before
powering on the wine cellan
Your wine cellar has 4 leveling legs. After properly placing your wine cellar in
its final position, you can level your wine cellan
Leveling legs can be adjusted by turning them counterclockwise to raise your
wine cellar or by turning them clockwise to lower your wine cellan
Install the legs by screwing in the legs into the preset screw holes. (Please note
that the leg which stands on the hinge is the shorter leg.)
To assure your wine cellar works at the maximum efficiency it was designed for,
you should install it in a location where there is proper air circulation and
electrical connections.
The following are recomn-lended clearances around the whae cellar:
Sides ...............
2 "(50ram)
Top ....................
4"
(100mm)
Back .................. 2= (50mm)
Do not over fill your wine cellar for proper internal air circulation.
NOTE:
Allow
enough
space
in the front
of the unit to open
the door
to 120 ° ,
