Idiomas disponibles
Idiomas disponibles
CM 9020, CM 9021
Do not use if there are visible signs of damage to the
heater.
Use this heating appliance on a horizontal and stable
surface, or if possible fix it to a wall.
WARNING: Do not use this heater in rooms that are
occupied by persons who cannot leave the room by
themselves, unless permanent surveillance is provided.
WARNING: To reduce the risk of fire, keep textiles,
curtains, or other flammable material at least 1m away
from the air outlet.
LIGHTING THE FIREPLACE:
For flame effect only: Slide the main on/off switch to the on position to have the flame effect
without any heater function.
For low heat: slide the main on/off switch to the ON position and the "I" slide switch to the ON
position.
For High Heat: Slide the main On/Off switch to the On position and slide the "I" switch and "II"
switch to the On position.
NOTE: The thermostat must be on in order to use the heat function.
THERMOSTAT SETTING:
After the fireplace has lit and the room has reached the desired temperature, slowly turn the
thermostat knob counter-clockwise until the heat turns off (you should hear a slight "click"). It will
automatically maintain this temperature. To lower the temperature, turn the knob furthest to the left
toward the LOW (-) position. To increase the temperature, turn the thermostat knob clockwise to the
HIGH (+) position.
14
