Product Installation - Aquaris E1 Manual Del Usuario

* Check whether the router has enabled the Wi-Fi anti-squatter setting, which causes the
camera to be unable to connect to the Internet.
* Check whether the router has enabled AP isolation, which leads to the failure to search
the camera on the mobile phone in the LAN.

Product Installation

1. Please make sure the camera is added successfully, and then install it onto the wall.
2. You can place the camera on a horizontal surface, such as a desk, table, bookcase,
and so on.
3. There is a package of screw accessories inside the packaging, which you can use to
fix the camera to the wall surface you want to fix.
4. There is a base accessory in the package, which can be used to support the wall
mount with a 1/4" screw size for the camera installation. Firstly, remove the 3M
tape on the base accessory, then fix the accessory to the bottom of the camera
according to the structure holes and apply pressure on the contact area between
the base accessory and the 3M adhesive at the bottom of the camera to make the
3M adhesive stick firmly. At this point, the camera can be installed on the wall
mount through the base accessory. Please note that the wall mount is not provided
in the package and you need to purchase it separately.
Warnings:
• This product is NOT a toy. Please keep children away from this product.
• This product is designed for indoor use only. Do NOT use in humid environments or
outdoors.
• Beware of moisture, do NOT spill water or other liquids onto the product.
• Do NOT place this product near a heat source or strong electromagnetic
interference sources.
04