Product appearance is for reference only
and may differ from the actual product.
Appearance (Page 1 – A)
Component & Interface
No.
Component & Interface
1
Micro SIM Card Slot
2
Aviation Plug Socket
3
Safety Rope Attachment Point
4
Optical Lens
5
Thermal Lens
6
Loudspeaker
7
Microphone
8
OLED Display
9
Power Button
Cable Description (Page 1 – B)
1. BNC: Connect video interface.
2. Power Input Cable: Support 12 VDC power
supply.
3. RS-485 Cable
4. Network Cable: Connect the network interface
with network cable.
Preparation
Install Micro SIM Card (Page 2 – C)
Steps:
1. Loosen the screws on the Micro SIM card cover
with the cross screwdriver.
2. Remove the cover, and insert the Micro SIM
card until it clicks into the locked position.
3. Cover the Micro SIM card slot and tighten two
screws.
Note:
Tighten the screws of Micro SIM card cover to
avoid poor airtightness. The screws cannot be
embossed after the Micro SIM card is installed.
Install Carrying Handle (Page 2 – D)
Steps:
1. Remove the rubber plugs on device.
2. Install the carrying handle to the device. Insert
and tighten the handle screws with slotted
screwdriver.
Note:
● Please properly keep the rubber plugs and
insert them in place when you need to remove
the handle.
● ① Rubber Plug, ② Carrying Handle
Installation Methods
Install Device on Tripod (Page 3 – E)
Steps:
1. Rotate the magnetic bottom plate clockwise to
tighten it when installing the plate to the tripod.
2. Put the device on the magnetic bottom plate.
The magnet at the bottom of the device can fix
the device on the plate.
Note:
● Please purchase the tripod separately.
● ① Magnetic Bottom Plate, ② Tripod
Install Safety Rope (Page 3 – F)
Install the safety rope to the device to prevent
accidental fall. Move the device to a selected
position, and then attach one snap hook of the
safety rope to the attachment point on the device.
Note:
Make sure to attach the other snap hook to
a reliable object to prevent accidental fall.
Movement Range Adjustment (Page 4 – G)
Connect the corresponding cables and turn the
power on; the device will do the self-test
automatically. You can also adjust the device
movement range by web browser. The panning
range is 0° to 360°, and the tilting range is -20° to
90°.
Waterproof Method (Page 4 – H)
1. Install network cable waterproof jacket.
2. Use supplied waterproof tape to protect cable
connectors and unused cables.
Protective Measures (Page 5 – I – 1)
Activate and Access Device (Page 5 – I – 2)
User Manual
Regulatory Compliance and Safety Information
Read all information and instructions in this
document carefully before using the device and
keep it for further reference.
For more device information and instructions,
please visit our website at
https://www.hikvision.com. You can also refer to
other documents (if any) accompanying the device
or scan the QR code (if any) on the packaging to
get more information.
© 2023 Hangzhou Hikvision Digital Technology
Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and
managing the Product. Pictures, charts, images
and all other information hereinafter are for
description and explanation only. The information
contained in the Manual is subject to change,
without notice, due to firmware updates or other
reasons. Please find the latest version of this
Manual at the Hikvision website
(https://www.hikvision.com/).
Please use this Manual with the guidance and
assistance of professionals trained in supporting
the Product.
Trademarks
and other Hikvision's trademarks and
logos are the properties of Hikvision in various
jurisdictions.
Other trademarks and logos mentioned are the
properties of their respective owners.
DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THIS MANUAL AND THE
6
English
