UNIPRODO UNI IHP 01 Manual De Instrucciones página 22

1. Choose the mounting position, keep the required minimum distances.
Distances required for device mounting
2. Mark the positions for the bore holes onto the drilling template (D) if there are no existing marks.
Stick the drilling template on the wall. Drill the holes with an appropriate bit.
3. Insert the screws into the dowels and fasten the screws. The screws should protrude approx.0.5 cm
from the dowels.
4. Hang the infrared heating device (A).
EN
front
left
right
top
Minimum 30cm
Minimum 10cm
Minimum 10cm
Minimum 50cm