USING THE COLD WATER
DISPENSER
Using the Water dispenser
(RF261 B, RF26H)
Place a glass underneath
the
water outlet
and push gently
against the water
dispenser
lever with your glass. Make
sure the glass is in line with
the dispenser
to prevent
the
water from splashing
out.
If you have just installed
the
refrigerator
or installed
a new
SH
water filter, Flush 3 gallons
through
filter before
use (flush approximately
6 minutes).
Make sure
water flows cleanly
before
drinking.
z_
If you have a long vacation
or business trip,
CAUTION close the water valve and shut offthe
water
supply
to the Refrigerator.
This will help
prevent
accidental
leakages.
®
Water
clouding
phenomenon
All water
provided
to refrigerators
flows
through
the core filter which
is an alkaline
water filter. In this process, the pressure in
the water
that has flowed out of the filter
gets increased,
and oxygen and nitrogen
become
saturated.
When
this water
flows
out in the air, the pressure plummets
and
the oxygen
and nitrogen
get supersaturated
so that they turn into gas bubbles.
The
water could
look misty due to these oxygen
bubbles.The
water
may look temporarily
cloudy
due to these oxygen
bubbles.
After
a few seconds, the water will look clear.
®
The water tank's capacity
is approximately
one third
(1/3) of a gallon.
Please wait 1 second before removing
the
cup after dispensing
water
to prevent
spills.
16 operat ng