[UK] INSTRUCTION MANUAL
Read carefully and retain this instruction tor safe operation.
GENERAL SAFETY INSTRUCTIONS
Do not connect the fan to the power supply until the fan has been FULLY
•
assembled.
•
Unplug the fan before adjusting it in any way.
•
Never operate the fan if it has damaged or worn parts. In such circumstances,
it should be handed over to the manufacturer, their service agent or a similarly
qualified person for repair.
Always position the fan on a stable and level surface.
•
•
Do not spray anything into the fan.
•
Do not use the fan near flammable substances or in areas where there is a
risk of fire.
•
To reduce the risk of electric shock, do not remove any screws.
Do not insert fingers or other objects through the fan guard.
•
•
Do not remain directly in the breeze created by the fan for long periods of
time.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
•
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
•
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without
•
supervision.
Ensure that the fan is switched off from the supply mains before removing the
•
guard.
INSTRUCTIONS FOR SAFE OPERATION
Fan should be used only at rated voltage. This fan is designed for a AC220-
1.
240V 50/60Hz electric supply.
Never insert fingers or any other object through the fan guard when fan is
2.
running.
Unplug when not in use, or when moving fan from one location to another, and
3.
before putting on or taking off parts and before cleaning.
Do not put your fingers through the openings. Do not let children put any
4.
objects into the front case.
Do not use this fan outside or in a damp area such as bathroom.
5.
Do not place the electrical cord under a cover. Do not overlay the cord with
6.
little covers or such element. Place the cord in an area where there is no risk
to stumble.
The fan must always be unplugged when not operating. To unplug the heater,
7.
all the switches must be on the position "OFF", and then the plug could be
disconnected.
Do not operate the fan in an area where gasoline is used or stocked, painting
8.
or such flammable liquids.
lf you need to move the fan, switch off and unplug it.
9.
lf you need maintenance, please send the fan back to the agent.
10.
No part of this fan must be replaced by the user.
11.