Idiomas disponibles
Idiomas disponibles
Paper Shredder
Operating
Instructions
Warning
Installation
Operation
Maintenance
Troubleshooting
* One Folded Sheet Of Paper Equates To 2 Sheets Of Paper
Heavier paper, humidity or other than rated voltage may reduce shredding capacity.
Installation
1. This model includes a built-in safety interlock mechanism, which requires the shredder to be
correctly mounted on to the included wastebasket. THE SHREDDER WILL NOT OPERATE UN-
LESS IT IS PROPERLY MOUNTED AS PICTURED.
2. A socket-outlet should be near the equipment and be easily accessible.
3. Connect the power cord to any standard 120 volt AC outlet.
!
!
Caution:
Caution:
Shredders may have very sharp exposed blades on the underside. Use care when mounting
the shredder on the wastebasket.
Carefully lift and
1
remove shredder
head from the
wastebasket.
Gently place the
2
shredder head
onto the
wastebasket.
6
ENGLISH
Sheet Capacity
Paper Shred Size:
Paper Feed Entry Width
Credit Card Capacity
Duty Cycle
Voltage
• Shreds Credit cards, small paper clips, staples
12 Sheets of 20 lb. bond paper*
3/16 in. x 1 9/16 in. pieces
5mm x 40mm pieces
8.7 in. (22.0 cm)
1 at a time
7 min. on / 30 min. off
120V~60Hz / 3.0 A
Front
with
window
3
Make sure the
shredder head
is correctly
mounted.
Back
with
power
cord
