Troubleshooting
Shredder is jammed and runs in "Reverse" mode only /
Empty if bin full.
Carefully remove paper
on shredder
head bottom
Power Off then pull
paper side to side
With stubborn situations where the reverse function does not help, follow the steps below:
Turn off shredder
Set switch to Auto
Shredder does not feed or shred credit card or small piece of paper
Reverse for 5 sec
Reduce sheets
30
Min
Apply shredder oil and
wait for 30min.
Feed in the center
Overload icon is lit in red
!
Warning: DO NOT USE ANY
SPRAY CANS OR AEROSOLS.
1) Empty if basket full. Carefully remove
paper on shredder head bottom.
2) Set switch to reverse for 5 sec.
3) Turn off shredder then pull paper side
to side to remove jammed paper (as
much as possible).
4) Reduce the number of sheets being
fed (count pages to be sure not to
exceed the maximum sheet count).
1) Turn off shredder.
2) Apply shredder oil to the feed slot
(shredder oil not included). Let oil
soak in to paper and machine for 30
minutes.
3) Set the control switch to Auto/On.
• Position credit card or small piece of
paper over the credit card section of the
Feeder (center position).
• Try again.
ENGLISH
11