Idiomas disponibles
Idiomas disponibles
Installation guide
Product Information
1
Preparation
Hammer
Tape Measure
Phillips Screwdriver
Product parts
B
x1
Row hook
A
x1
E
x2
Single Door Cabinet or
Single Door Cabinet
Shelf Board
Note:
Only 8 pieces needed for the actual installation of F and G. The additional 8 pieces of F and 4 pieces
of G are for spare uses.
Mirror User Guide
The light colour on the switch button is blue when the mirror is off, and white when the mirror
is switched on.
1. When the mirror connected to the power successfully, the switch
Model 1
button will light up blue. When the LED light switched on, the button
turns to white.
2. Touch the switch button to switch on the LED light, touch again to
switch off.
3. For the mirror with demister function, demister pad will turn on
automatically when the LED light is on.
Light Switch/
4. For the mirror with dimmer light function, long press the switch button
Brightness Adjustment/
to adjust the light brightness.
Demister Switch
5. Energy saving model: the LED light and all the other functions will
be switched off after 3 hour standing by.
ENGLISH
6 mm Masonry Bit
Spirit Level
Electric Dril
C
x5
D
x5
Long Screw
Rawlplug
F
x16
G
x12
Hole Covering
Shelf Bracket
1
Installation guide
1. When the mirror connected to the power successfully, the switch
Model 2
button will light up blue. When the function is switched on, the button
light turns to white.
2. Touch the light switch to switch on the LED light, touch again to
change the light colours, touch again to switch off
3. When the LED light is on, long hold the light switch to adjust the light
brightness.
1. Light Switch/
4. Touch the demister button to switch on/off the anti-fog function.
Colours & Brightness
5. Energy saving: The mirror will be automatically switched off after
Adjustment
being on stand by for 3 hours.
2. Demister
6. Memory: Save the last setting when light off.
Installation
2
Step 1:
Based on the prefabricated screw hole position on the row hook(B) and the screw size, use an
electric drill to drill 3 suitable holes in the wall. Then drill the screws into the wall. (Recommended
installation height for the hook: 1850mm from floor)
Schritt 1:
B
Row hook
For Surface Mount on the Wall
ENGLISH
2
