Idiomas disponibles
Idiomas disponibles
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
There will be a 3 degree variance
+/-
between
the temperature
you
select and the temperature
indicated
on the LED readout.
This occurs
because the wine cooler activates
and deactivates
trying
to maintain
your
desired temperature.
There is often a 10 ° variance
between
the top
and bottom shelves of the wine cooler. Therefore,
if you have set the
wine cooler for 50 ° and have a mix of red and white wines, you may
want to put the white wine on the bottom shelf where the temperature
will be 45 ° F, and place the red wine on the top shelf where the
temperature
will be 55 ° F.
Shelving
(Type and number of shelves will vary per model)
The shelves are designed
for appearance
and easy cleaning.
Larger
bottles or Magnums
can be more easily accommodated
at the cross
shelves at the bottom of the cooler.
You will notice that the shelves are
designed
so the bottles do not line-up
directly
over one another,
This
allows free air movement
and provides
more space,
• Your wine cooler comes with 3 or 4 wine shelves which glide out. This
number depends
on the model purchased,
To remove the glide out shelves, pull out the shelf completely,
carefully
lift the shelf from the securing
hooks on the tracks and remove.
To replace the shelf make sure that the securing
hooks on each track are
in between
the shelf stoppers on the shelf.
_nterior
Ligh_
(see f_g.#1)
• To complement
the look of your wine collection,
a soft light has been
built into the wine cooler.
Simply push the "On/Off"
button and the
light comes on, push again
for off. For maximum
energy efficiency,
leave light off when not viewing
your collection,
• When
door is open the light will go on, Upon closing the door,
the light will go off in approximately
15 seconds.
NormaM
Operating
Sounds
You May
Hear
• Boiling water,
gurgling
sounds or slight vibrations
that are the result of
the refrigerant
circulating
through the cooling
coils,
• The thermostat
control will click when it cycles on and off,
