Idiomas disponibles
Idiomas disponibles
lnitiaM
Setup
Once you have plugged
the unit into an electrical
outlet, let the unit run for at least
30 minutes to acclimate
itself before making
any adjustments.
During
this time the
Red Wine
light will stay on. Temperature
inside the cooler,
if not adjusted,
will be at
55°_60°E
T÷_perature
Adjustments:
See fig. # 1
The wine cooler is preset from the factory
to automatically
accommodate
temperature
requirements
for red or white wines. If you
store mostly white wines, press the "White
Wine"
button and the wine
cooler will maintain
an average
temperature
between
45 ° to 50 ° E
Pushing the "Red Wine"
button will yield
an average
temperature
between
55 ° to 60 ° E
The wine cooler can be set to any temperature
you desire to
accommodate
your wine storage
requirements.
To set the temperature,
press both the "White
Wine"
and "Red Wine"
buttons simultaneously
and hold for approximately
3 seconds.
Now you are in temperature
set
mode.
Decrease the temperature
by pushing
the "White
Wine"
button
and increase
the temperature
by pressing
the "Red Wine"
button,
Pressing the appropriate
button 3 times will adjust the temperature
3
degrees,
press 4 times equals 4 degrees,
5 times equals
5 degrees,
and
so on, Once you have selected the temperature
you desire, push the
"On/Off"
button,
Now the wine cooler
is programmed
and the LED
readout
will return to current internal
temperature
reading,
fig. # 1
0
I
UWN
+:
I
tip
°@
