Idiomas disponibles
Idiomas disponibles
Bluetooth®
Always check tool settings
before use. Settings may be
different than when the tool was last used. The
connectivity module enables transfer of data
and settings based on Bluetooth® wireless tech-
nology. With module installed, select tool set-
tings may be changed remotely by a paired Blue-
tooth® device and user installed app.
This tool is equipped with a
radio interface. Local oper-
ating restrictions, e.g. in military sites or hos-
pitals, are to be observed. Transmitters have
demonstrated an ability to unintentionally inter-
fere with other devices.
THINK SAFETY
SAFETY IS A COMBINATION OF OPERATOR
COMMON SENSE AND ALERTNESS AT ALL
TIMES WHEN THE TOOL IS BEING USED.
Connectivity functions
System Requirements for Using the App
System Requirements
Mobile device (tablet,
smartphone)
Installing and Setting up the App
You will need to install the device-specific app
before you can use the connectivity functions.
— Download the app from the correspond-
ing app store (Apple App Store, Google Play
Store).
Note: You will need to have a user account
with the relevant app store to do this.
App name
iOS
Bosch Toolbox
— Then select the MyTools or Connectivity sub-
item in the app.
160992A8B9 GBH18V-28C 20230316.indd 21
page heading
Connectivity
Android 6.0 (and newer)
iOS 11 (and newer)
Android
-21-
— The display of your mobile device shows you
all of the subsequent steps required to con-
nect the power tool to the mobile device.
In conjunction with the Bluetooth® Low Energy
module GCY 42, the following connectivity func-
tions are available with the Bosch Toolbox app
for the power tool:
— Registration
— Personalisation of Favorite working mode
(performance and behaviour)
— Tool settings (e.g. dust extraction runtime,
worklight parameters)
— Status check, output of warning messages
— General information
— Management
Read the corresponding operating instructions
for information about the Bluetooth® Low En-
ergy Module GCY 42.
The smartphone symbol 26 lights up if the pow-
er tool sends information (e.g. a temperature
warning) to a mobile device via Bluetooth® wire-
less technology.
Deactivating the connectivity function
• With the Bluetooth® Low Energy Module, the
power tool is equipped with a radio interface.
Local operating restrictions, e.g. in aircraft or
hospitals, must be observed.
Note: The cover 13 can only be securely closed
if the Bluetooth® Low Energy Module and the
button cell are situated in the power tool.
— To deactivate the Bluetooth® Low Energy
Module, rotate the button cell or place means
of insulation between the button cell and
Bluetooth® Low Energy Module.
— Close the cover 13 to prevent dirt from get-
ting in.
3/16/23 4:08 PM
