Craftsman 917.249160 Manual Del Usuario página 7

Ocultar thumbs Ver también para 917.249160:
Idiomas disponibles

Idiomas disponibles

3
CONTAINER
MOUNTING
(See
Fig. 3)
1.
Install one container to left side first. Install another
container to center position and one in right position.
NOTE: Left edge of right container should always overlap
right edge of left container at center supports.
2.
Close cover and lock latches over center support
tubes. To lock and release latches, pull back on latch
handles.
COVER LATCH
HANDLES
CENTER
SUPPORT
TUBES
CONTAINER
HANDLE
Fig. 3
4
LOWER
CHUTE (See Fig. 4)
.
2.
Raise and hold deflector shield in upright position.
Place slot in lower chute over mounting tab on mower
and position lower chute over mower opening as
shown.
3.
Hook rear latch into flange hole on back of mower.
4.
Hook front latch into tab hole on front of mower.
A
CAUTION:
Do not remove deflector
shield from
mower.
Raise and hold
shield when
attaching
lower chute
and allow it to rest on chute while in
operation.
DEFLECTOR
OPTIONAL
SHIELD
FRONT
GAUGE
WHEEL
TAB
FRONT
LATCH
"REAR
LATCH
FIG. 4
loading